APEX Selective Pallet Racking

Here at Global Industrial, we offer APEX selective pallet racking. It has been designed and engineered in Australia and complies with the latest Australian racking code AS 4084-2023 for steel storage racking.

Selective pallet racking is the most common type of pallet racking used in Australia today. There are many other variations such as; drive-in racking, double deep, cable racking, vertical racking and carpet racking, all of which are constructed with APEX components.

Every warehouse and customer is different.  Whether your looking at upgrading your existing rack or relocating, Global is here to help you with your needs.

 

NOTE: Order lead times vary between each warehouse depending on availability, current orders and time to pre-assemble frames. Usually the minimum turnaround time is 2-3 business days for pallet racking orders. Please contact your nearest warehouse for current lead times and any questions you may have.

 

Frames

Several frame grades (post sections) are available depending on the load capacity required.

All posts and frames are a pre-galvanised finished, silver in colour.

The standard frame heights available from our stock. Please note that special sizes can be made and ordered upon request

 

Frame Height	Frame Depth	Apex Section
914mm	610 / 838 / 1219mm	90-15
1829mm	610 / 838 / 1219mm	90-15
2438mm	610 / 838 / 1219mm	90-15
3048mm	610 / 838 / 1219mm	90-15
3658mm	610 / 838 / 1219mm	90-15
4267mm	610 / 838 / 1219mm	90-15 / 90-20
4877mm	610 / 838 / 1219mm	90-15 / 90-20
6096mm	610 / 838 / 1219mm	90-15 / 90-20 /90-25
7315mm	610 / 838 / 1219mm	90-20 / 90-25

 

Powder Coated Beams

APEX powder coated orange box and open beams are designed to withstand a higher level of impact and retain their shape better than some other types of beam sections on the market.

The below are our standard sizes available off the floor. Please note that special sizes can be made and ordered upon request.

 

Beam Length	Box Section	Connector
1372mmL	50 x 45mm (open beam) 80 x 40mm	3pin 3pin
1524mmL	80 x 40mm	3pin
1829mmL	80 x 40mm	3pin
2134mmL	80 x 40mm	3pin
2438mmL	80 x 40mm	3pin
2591mmL	50 x 45mm (open beam) 80 x 40mm 100 x 50mm 120 x 50mm 140 x 50mm	3pin 3pin 3pin 4pin 4pin
2743mmL	50 x 45mm (open beam) 80 x 40mm 100 x 50mm 120 x 50mm 140 x 50mm	3pin 3pin 3pin 4pin 4pin
3048mmL	120 x 50mm	4pin
3353mmL	120 x 50mm	4pin
3658mmL	140 x 50mm	4pin
3810mmL	140 x 50mm	4pin
4267mmL	140 x 50mm	4pin
4877mmL	140 x 50mm	4 pin

 

 

Outdoor Applications

Are you looking at installing racking outdoors? We can provide you with full comprehensive wind loadings and detailed concrete specs required to safely install your racking externally.

We suggest using hot-dipped galvanised (HDG) beams, footplates and floor anchors to prevent rust forming.

 

Hot-dipped Galvanised Beams

APEX hot-dipped galvanised beams are made from a rectangular hollow section and are typically used for outdoor applications. The hot-dipped galvanised surface treatment makes them more resistant to rusting.

1372mmL	75 x 50mm	3pin
2591mmL	75 x 50mm 100 x 50mm 125 x 50mm	3pin 3pin 4pin
2743mmL	75 x 50mm 100 x 50mm 125 x 50mm	3pin 3pin 4pin